Model TLC System
Model TLC All-Fuel Chimney offers current technology in factory-built chimney design by providing superior performance, durability and safety.
- Embossed Coupler – Prevents moisture penetration
- 304 Stainless Steel Inner Liner – High grade material heats up quickly to enhance draft
- 304 Stainless Steel Outer Casing - Premium material prevents corrosion
- Mineral Wool Insulation - Augured in for better insulating value to keep outside temperatures low for safety and inside temperatures high for performance
- Premium Fiber Insulation – 100% mineral wool (no chlorides)
- Twist-Lock connection – Easy assembly
TLC — Chimney Lengths
- Slim, advanced design allows for installation between 16” centers and still provides 2” clearance from combustible material.
- Secure twist-lock design couples chimney sections together with just a 1/8 turn. Locking bands secure joints.
- Includes locking band.
- Sections overlap by 11/8”.
- Chimneys are sized according to the inner diameter and are available in 5” through 14”.
- The outside diameter is 2” larger than the inside diameter.
TLCLB — Stainless Steel Locking Bands
- Locking bands are used at all joints for safety and stability.
- Locking band flanges engage the curl in each end of the adjoining sections, holding them securely together.
TLCEK — Insulated 15- and 30-degree Elbow Kits
- The insulated elbow is used when offset is required.
- Locking bands must be used on all elbows.
- A maximum of 6 feet is allowable between offsets.
- Elbow is fully insulated and can be used with the same 2-inch clearance as chimney lengths.
- Elbow support must be used with all offset installations and will support 15 feet of chimney.
- Elbows do not have twist-locking ridges, so they can be rotated to attain optimum positioning offset and allow chimney to return to correct vertical alignment prior to installing locking bands.
- May not be used outdoors.
- Elbow kits include: 2 elbows (Exception: 12” and 14” sizes include four 15° elbows assembled into two 30° elbows) 4 locking bands (Exception: 10”, 12” and 14” sizes include two locking bands) 1 elbow support All hardware
TLCITP — Insulated Tee Cap
- Permits typical 2” airspace clearance to combustibles.
- 5” to 8” sizes are twist-lock and for non-wall support applications only.
- 10” to 14” sizes are press-fit design.
TLCT — Insulated Tee With Tee Cap
- The insulated chimney tee may be used for through-the-wall installation, using awall support.
- A chimney length is required to pass safely through a wall.
- Includes the following:
- Two locking bands
- 5” to 8” sizes have an uninsulated (single-wall) twist-lock tee cap for non-wall support applications only.
- 10” to 14” sizes have an insulated press fit tee cap.
TLCF12 — Adjustable Flashing Assembly (6/12 - 12/12 pitch)
- Used where the chimney passes through a roof with apitch of 6/12 to 12/12.
- Comes complete with storm collar.
- All seams are sealed with silicone sealant.
- Galvalume construction.
TLCF6 — Adjustable Flashing Assembly (0 - 6/12 pitch)
- Used where the chimney passes through a roof with apitch of Flat to 6/12.
- Comes complete with storm collar.
- All seams are sealed with silicone sealant.
- Galvalume construction.
TLCFF — Tall Cone Flashing
- 0/12 to 2/12 pitch.
- All seams are sealed with silicone sealant.
- Galvalume construction.
- Comes complete with storm collar.
TLCRBF — Rubber Boot Flashing Kit
- This kit fits 5”, 6”, 7” and 8” chimneys.
- Used where the chimney passes through a corrugated roof.
- 8" Rubber boot flashing fits roof pitches up to 10/12
- 5"-7" Rubber boot flashing fits roof pitches up to 12/12.
- UL-listed
- Kit includes:
- Special Storm Collar
- Rubber Boot
- Spacer Kit
- Special Boot-Mounting Screws
TLCSC — Storm Collar
- Used in conjunction with roof flashing to keep precipitation out.
TLCSS — Silicone Sealant For Storm Collar
- Used to seal storm collar to chimney length above cone of flashing.
- 3-ounce tube.
TLCACP/TLCACPT — Adjustable Ceiling Plate
- Matte black finish.
- Adjusts to multiple roof pitches.
- Covers 2-inch space around chimney for attractive finish
TLCHDRBK — Adjustable Universal Roof Guy Kit
- Used when more than 5 feet of chimney extends from the roof.
- The kit includes two rods and an adjustable band.
- Each rod extends to 4 to 6feet.
- The adjustable band will fit 5” to 14” sizechimney.
- Sizes available: 7 to 16
TLCSI — Shielding Insulation Wrap
- Insulation for use with Attic Insulation Shield, Wall Thimble and Cathedral Ceiling Support Box.
- Protects building materials against radiant heat from the chimney.
- Helps maintain temperatures within the chimney system and within the housing envelope to prevent condensation on exterior.
- UL-listed.
TLCSP — Soffit Plate
- Used where the chimney passes through a soffit to provide a finished appearance.
- Maintains the mandatory 2-inch clearance to combustibles.
TLCSPA — Stovepipe Adapter
- For quick and easy transition from blackstovepipe to factory-built chimney.
- Twist-lock for easy connection.
- 5” to 8” is black.
TLCTC — Matte Black Trim Collar
- Used on wall support installations when passing through a noncombustible wall.
- Matte black finish with brass trim for an enhanced hand-crafted appearance.
TLCWB — Wall Band
- Stainless steel construction.
- Provides lateral support for the chimney when installed adjacent to a wall.
- Maintains the mandatory 2-inch clearance to combustibles.
- Used 4 feet above the tee, then every 8feet thereafter.
DIKAPT — Anti-Downdraft Chimney Cap
-
Now UL Approved on Class A Chimneys UL 103HT for use with AmeriVent TLC® chimneys.
-
Available in 5" to 8" Diameters
-
Heavy Duty Construction: Built with high-quality 300 Series stainless steel for long-life and durability.
-
Easy to Install & Remove for Inspection & Cleaning:Great after-market cap solution for chimneys with downdraft or replacement issues.
-
Smart Choice Lifetime Limited Warranty: Covers defects in material and workmanship.
TLCC — Rain Caps
- Advanced design, premium quality stainless steel.
- Provides protection against the elements.
- Twist-lock connection for secure installation.
TLCSA/TLCSAD — Spark Arresters
- For use with 6” to 14” caps.
TLCFRS — Firestop Radiation Shield/Joist Shield
- Required where an enclosed chimney passes from a lower living space into an upper living space.
- Maintains the mandatory 2-inch clearance to combustibles.
- Joist Shield is used in floor/ceiling penetrations, other than those that include a ceiling support.
- Joist Shield not required when passing through roof.
TLCIS — Attic Insulation Shield
- The attic insulation shield must be installed where the chimney enters the attic space in any installation.
- Designed to keep insulation away from the chimney and to maintain the mandatory 2-inch clearance to combustibles.
- Must be used when the chimney penetrates an unoccupied attic.
- Not to be used for enclosed chimneys.
TLCRRS — Rafter Radiation Shield
- The rafter radiation shield must be installed immediately below the roof if the chimney is enclosed.
TLCWT — Black Wall Thimble
- Used in a wall support installation.
- Radiation shield is included with spacers, which maintain the mandatory 2-inch clearance to combustibles.
- Attractive matte black finishing trim is included with stylish brass finish.
- Adjustable wall thickness from 4½” to 8¾” for 5” to 8” sizes and from 6” to 11” for 10” to 14” sizes.
- 10” to 14” sizes have a round face plate without brass trim.
TLCAP — Anchor Plate
- To be used with specifically listed zero-clearance fireplaces for direct connection of all-fuel chimney.
- 5” to 8” sizes are 14-gauge galvanized base plate, and 10” to 14” sizes are 10-gauge galvanized base plate.
TLCAWS — Adjustable Wall Support
- Used to support the chimney on a through-the-wall installation.
- 5” to 8” sizes include top plate, side brackets, hardware, non-twist-lock insulated tee cap, and a long L-bracket to hold tee cap in place.
- 10” to 14” sizes do not include the cap. Use tee cap packaged with tee.
- 2” to 6” clearance away from wall.
- 5” to 8” sizes support between 30feet and 74 feet ofchimney, based on size and orientation. Seeinstructions for specific heights.
- 10” to 14” sizes support up to 40feet of chimney.
- 12”to 14” sizes are nonadjustable supports.
Non-Twist-Lock Insulated Tee Cap (5” to 8” sizes) L-Bracket (5” to 8” sizes)
TLCCSR — Ceiling Supports
- For use in ceiling support installations.
- Supports a total of 50feet of chimney above.
- Chimney pipe cannot pass below support.
- Matte black finish with brass finishing ring, support gives a premium finished appearance.
- Also acts as a firestop.
- Must always use stovepipe adapter.
TLCCSS — Cathedral Ceiling Support Box
- Used in pitched ceiling support installations.
- Supports a total of 38 feet of chimney with up to 15 feet below support. Includes support clamp, allowing chimney pipe to pass belowsupport.
- Matte black finish with stylish brass finishing trim and ceiling trim to cover rough opening.
- Also acts as a firestop with use of trim plate.
- 12/12 maximum pitch.
TLCITC — Non-Twist Lock Insulated Tee Cap
- 5" to 8" sizes
- Used with the Wall Support (TLCAWS) and L-Bracket
TLCIWS — Adjustable Intermediate Wall Support
- Used as supplementary support when chimney system height exceeds maximum height allowed by wall support.
- Supports an additional 38 feet of chimney.
- Includes top plate, support band, side brackets, and hardware.
- 2” to 6” clearance away from wall.
TLCRS — Adjustable Roof Supports
- The roof support may be used on a roof and adjusts to any roof pitch.
- It may be used above an offset to support the offset or as a supplementary support when the chimney height exceeds that of the primary support.
- Supports a total of 30 feet of chimney with up to 20 feet below support.
- Does not act as a firestop.
- Larger models contains one 18-inch length of pipe with roof brackets preinstalled. Includes hardware.