Amerivent Direct Vent
The following Adapters are available to convert an AMERIVENT Direct Vent system (ADV) to a Selkirk Model Direct Temp System
(DT) or vise-versa. These Adaptors are available for 4" and 5" diameters, unpainted and painted.
Adapters to use 4” & 5” Selkirk Direct Temp with the 4” & 5” Amerivent Direct Vent product line.
Adapters to use 4” & 5” Amerivent Direct Temp with the 4” & 5” Selkirk Direct Vent product line.
Typical Installation
Use at appliance for connecting from Co-axial start collars to a pair of Collinear tubes passing through existing chimneys.
Use at top of existing chimney to convert Collinear tubes to Co-axial AmeriVent Direct Vent. Flashing is included.
For use specifically with 4" x 7" Kingsman appliances.
For use specifically with Napoleon and Continental fireplaces and stoves.
Engineered for Valor fireplaces, requiring 4" x 6 5/8" direct vent venting.
- Direct Vent to Direct Temp & Direct Temp to Direct Vent Adapters
- Adapters to use 4” & 5” Selkirk Direct Temp with the 4” & 5” Amerivent Direct Vent product line
- Adapters to use 4” & 5” Amerivent Direct Temp with the 4” & 5” Selkirk Direct Vent product line
- Telescopes onto standard pipe sections for adjustments from 3" to 5" for 7A
- AmeriVent Direct Vent Pipe features rugged, co-axial tube construction with a stainless steel inner wall and a galvanized steel outer wall, separated by two spacers.
- Twist-lock joints offer fast installations.
- Factory-installed inner gasket ensures a leak-free joint.
- Also available in a painted black finish.
- To order painted black finish, add B to product Part No. (ex. 4D7B).
- Available in a variety of adjustable lengths.
- AmeriVent Direct Vent Pipe features rugged, co-axial tube construction with a stainless steel inner wall and a galvanized steel outer wall, separated by two spacers.
- Twist-lock joints offer fast installations.
- Factory-installed inner gasket ensures a leak-free joint.
- Also available in a painted black finish.
- To order painted black finish, add B to product Part No. (ex. 4D7B).
- Available in a variety of lengths.
- Use with 45° fireplace adapters or in pairs to go around obstructions.
- Add pipe sections between elbows for additional offset.
- Also available in a painted black finish. To order painted black finish, add B to product Part No. (ex. 4D45LB).
- Four-section design provides smooth, low-resistant 90° offset.
- Also available in a painted black finish. To order painted black finish, add B to Part No. (ex.4D90LB)
- Used as end cap for horizontal applications only.
- Provides installer an additional 5" of flexibility
- Now even simpler to connect the venting system to the termination
- No need to be exact in the length of your horizontal run
- Sleek, low profile design.
- Siding Shields sold separately.
Use for horizontal venting applications. Corrosion-resistant construction with stainless steel inner wall. Low-restriction design improves efficiency and minimizes wall temperature. Cap shown with the vinyl siding shield attached. Shield included in box, unattached.
The cover provides a wind screen for homes in high wind areas. It shields and hides horizontal caps, providing added heat protection for children and pets. No new holes to drill; the cover uses existing cap screws and holes in the base. One cover works with both 4" and 5" horizontal caps. These covers can also be used on snorkel caps. The sturdy, galvanized steel cover can be painted to match the exterior color of the home. Not listed.
Use for horizontal vent installations that require a vertical rise on the exterior of the building. Corrosion-resistant construction with stainless steel inner wall. Low-restriction design improves efficiency and minimizes wall temperature.
Used with a flashing and mastic to seal to vent pipe, the storm collar provides extra weather protection.
Use for vertical venting applications. Corrosion resistant construction with stainless steel inner wall. Low-restriction design improves efficiency.
For use ONLY with Square Horizontal Cap.
- Available in aluminum, black powder-coated aluminum, and solid copper.
- Homestyle™brand offers lower profile, greater symmetry and clean, crisp lines.
- Patented, award-winning design. U.S. Patent No. D503,471 Interior baffles offer superior wind (and animal) projection.
- High wind tested.
- Eliminates safety concerns and the cost of decorative shrouds.
- Three collinear bottom styles to accommodate most home installations.
- Universal direct vent connections fit most brands, and the one-piece design means lower overall installed costs.
- Decorative caps with universal bases have wide flanges to provide versatility in installations.
- Caps used on direct vent collinear systems replace two parts—the existing cap and a transition part that combines to side-by-side flexible vents into a single co-axial vent.
- Caps with fitted bases are ready to install on existing clay flue tiles.
- Proudly made in the U.S.A. Tested and listed with many major appliances.
Use on single-story or on top story of multi-story building. Use to keep insulation from making direct contact with vent pipe.
Fits flat to 5/12 pitch roofs. Double-seamed construction for protection from leakage.
- Provides vertical support for vent and offsets, while maintaining clearance from the wall and providing a firestop.
- Can be used with the black painted Face Plate for the interior ceiling.
Use as support and firestop in cathedral ceiling installations. Cathedral Ceiling Support Trim Plate is a decorative trim used to conceal rough opening where Cathedral Ceiling Support passes through ceiling. Fits from flat to 12/12 pitch ceilings. Cathedral Ceiling Support and Cathedral Ceiling Support Trim Plate painted black.
Use as a decorative cover for the Firestop Support Plate or Wall Thimble. Black painted surface for interior wall.
Provides lateral support for vent and offsets, while maintaining clearance from the wall.
Provides clearance and firestopping for through-the-wall installations. Can be used with a black painted Face Plate for the interior wall. Adjustable from 4 1/2" to 8 1/2".
The Co-axial Chimney Kit is used when converting an existing 8" factory-built chimney to a direct vent appliance. Includes a black Conversion Adapter (4DCNA) and an unpainted large Cap Adapter (4DCAA). Uses a UL-listed 4" aluminum flex vent pipe and a 7" aluminum flex vent pipe (sold separately).
The Masonry Chimney Kit is used when converting an existing masonry chimney to a direct vent appliance. Includes a black Conversion Adapter (4DCNA), an unpainted small Cap Adapter (4DCAB), a black Face Plate (4DFPB), and a square flashing. Uses a UL-listed 4" flex vent pipe and a 7" flex vent pipe (sold separately).
Kit is available in 4" x 6-5/8" and includes:
- Black 90° Elbow
- Black Face Plate
- Round Horizontal Cap
- 24" Black Length
- 12" Adjustable Black Length.
Kit is available in 4" x 6-5/8" and includes:
-
Black 90° Elbow
-
Black Face Plate
-
Round Horizontal Cap
Kit includes black 90° elbow, black face plate and round horizontal cap.